H
H
New Page 1
New Page 1
BH780-C
High-Speed Lockstitch Buttonholing Machine
Recommended
to use for the following:
♥ Shirt Making
♥ Tailoring
♥ Designers
♥ Boutiques
♥ Manufacturers
★
Specifications:
| Model |
 |
 |
 |
| BH780-A |
A:
30 mm/ B: 5.6 mm |
6.35
~ 19.05 |
A:
9.4 ~ 22mm / B:2.5 ~ 4mm |
| BH780-B |
A:
40 mm/ B: 6.6 mm |
6.35
~ 25.4 |
A:
9.4 ~ 33mm / B:2.5 ~ 5mm |
| BH780-C |
A:
46 mm/ B: 6.6 mm |
6.35
~ 31.75 |
A:
9.4 ~ 40mm / B:2.5 ~ 5mm |
| BH780-D |
A:
53 mm/ B: 6.6 mm |
12.7
~ 38.1 |
A:16.5
~ 48mm / B:2.5 ~ 5mm |
| BH780-CV |
A:
46 mm/ B: 6.6 mm |
6.35
~ 31.75 |
A:
9.4 ~ 40mm / B:2.5 ~ 5mm |
| BH780-DV |
A:
53 mm/ B: 6.6 mm |
12.7
~ 38.1 |
A:16.5
~ 48mm / B:2.5 ~ 5mm |
 |
 |
 |
| 12 |
DPx5
#11 ~ #14 |
3600 |
| 12 |
DPx5
#11 ~ #14 |
3600 |
| 12 |
DPx5
#11 ~ #14 |
3600 |
| 12 |
DPx5
#11 ~ #14 |
3600 |
| 12 |
DPx5
#11 ~ #14 |
3600 |
| 12 |
DPx5
#11 ~ #14 |
3600 |
DESCRIPTION:
| ★ |
Smoother
lifting lever – The improved lifting lever which moves smoothly will
greatly reduce
operator's fatigue.
|
| |
|
| ★ |
The
life of the work clamp check has been greatly increased (12mm) so that
heavy-weight
materials may be sewn easily.
|
| |
|
| ★ |
The
number of stitches can be set at any value between 54 and 345 simply by
changing
the spur gears. The improved throat
plate base, tension release cam and feed cam will
provide still better buttonholing
finish.
|
| |
|
| ★ |
Furthermore, change
in the buttonholing size can easily be met by the use of exchangeable
gauge. |
| |
|
| ★ |
With
special design, this machine is available for flat and cylinder
operation. It is suitable
for sleeve and pocked.
|
| |
|
| ★ |
Safety
device to prevent knife from being dropped in case of needle thread
break age.
If the needle thread should break while
sewing, this safety device will prevent the knife from
being dropped, and therefore chance for
damage to work pieces under process is eliminated.
When you do not cut the fabric after
sewing, keep on pressing the knife stop lever, and the knife
will not be dropped.
|
| |
|
| ★ |
Automatic
one-pedal unit- This new unit incorporating an automatic device requires
only one
pedal operation to start or terminate
buttonholing. The work clamp check comes down or
goes up automatically through this
automatic device developed.
Accordingly, this unit may allow one
operator to attend to two machines.
|
| SYSTEM |
DESCRIPTION |
| KNIFE |
Rear
Knife System |
| HOOK |
DP
Type special rotary hook
(automatically lubricated)
|
| LUBRICATING
SYSTEM |
Fully
automatic lubrication |
| DRIVING
SYSTEM |
One
belt is used, two-step speed change,
automatic stop-motion system
|
| SAFETY
DEVICE |
Equipped
with emergency stop handle |